Cemix Limited are manufacturers and suppliers of Mortar Plasticisers
and quality building and construction chemicals.
Powder Plasticiser for Brick and Block Laying and Plastering
MORTAFLEX PLUS is a quality engineered powdered plasticiser especially developed for brick and block mortar and plaster. It will plasticise, increase set time, retain water, and help reduce efflorescence, shrinkage and cracking, reduce water absorption and increase bond strength.
Economical and easy to use. Can be used with all colours including black oxide.
Powdered Mortar Plasticiser
PLIMORTAR is a powder plasticiser based on the older style heavy slurry plasticisers used by contractors for over fifty years. PLIMORTAR will extend the mortars board life, reduce early stage drying and shrinkage of mortar joints, improve workability, produce water resistant joints and enhance tooling of the mortar joints without sacrificing the mortars compressive strengths.
PLIMORTAR is excellent for plaster and stucco and is a ready to use grey powder.
General Mortar Plasticiser
EASYPLI is a low dosage, high yield, cost effective plasticiser. It is a non-toxic and non-staining powder. EASYPLI will exceed the needs of the tradesman, giving good extension to board life with excellent workability. It meets the requirements of NZSS and ASTM when used in accordance with directions for dosage and mixing.
Cemix Ltd Best technology - Best Results
|Phone:||0800 ASK CEMIX, +64 (9) 636 1000||Website:||www.cemix.co.nz|
|Fax:||+64 (9) 636 0000||Email:||email@example.com|
|Address:||19 Alfred Street Onehunga, Auckland, New Zealand|
|CI/SfB:||(Y)||Shelf Location:||(Y) or Phone Supplier||Code:||cemi002|